The Kemper PROFILER Remote is the quintessential foot controller for your PROFILER. It is a must have for anyone who ones a Kemper profiler as it features a large and bright display, four pedal inputs, and super-easy “double click” assignment for stomps and effects. Only a single cable is required, and all Performances and Rigs can be controlled without further setup. As if this wasn’t enough, it also enables a Looper on your Profiler.
Double your switching power. Two switches in one, BOSS’s FS-6 combines latch- and momentary-type switching into one unit. With two switches conveniently housed side-by-side, the FS-6 allows each switch to be set for latch or momentary operation. Pick the configuration that best suits your playing style and setup.
FS-7 is a compact dual footswitch for remote control of effect pedals or amp channel switching. Two footswitches are arranged in tandem, which saves space on effects pedal boards. Two selectable modes for latch or momentary allow for control of a wide range of equipment.
Based on the same concept and features as the flagship ES-8, the ES-5 is pared down to offer more practical and essential use options for typical guitarists and bassists, and is drastically reduced in size to fit ready-made, standard-size boards.
The Radial X-Amp™ is an active Reamper™ that allows the engineer to play a pre-recorded track back through guitar amplifiers and pedals. This opens the door to explore new musical sounds and spur on the creative process so that your recording stands out.
The FS01 is a momentary foot switch for Zoom guitar and bass effects devices that allows you to bypass effects, turn the tuner on or off, enable the delay hold function, and mute the delay input, as well as providing tap tempo input for rhythms, the looper, and various effects parameters. The FS01 can also be used with the LiveTrak L-12, L-20 or R8 to start and stop playback, punch in and out manually, and change effect patches.
The FS-5U (silver) is a momentary "unlatch"-type footswitch, and the FS-5L (black) is a latch-type footswitch with an LED to indicate status. Both footswitches can be connected using ordinary guitar cables. Please consult your owner's manual for compatibility.
Alpha·Omega Super Intelligent Footswitch has three programmable footswitches for assigning channels (Clean, Alpha, Omega, Mod) and compressor state (On or Off). It also has a separate mute footswitch. The channel footswitch functions are programmed through Darkglass Suite, and settings are stored on the Alpha·Omega 900 amplifier.
Want to recall a preset of your Favorite settings on your Brigadier, Compadre, Deco, DIG, El Capistan, Flint, Iridium, Lex, or Riverside? Or remotely tap tempos for your BigSky, Deco, DIG, Flint, Mobius, TimeLine, or Volante? Or engage the Boost or Favorite on your Riverside? Add the tiny MiniSwitch and connect to your Strymon pedal with the included 1/4″ TRS cable.