Audio-Technica ATM350PL Cardioid Condenser Instrument Mic w/ Piano Mounting System
$697.00 $503.00 Add to cart

Audio-Technica ATM350PL Cardioid Condenser Instrument Mic w/ Piano Mounting System



This magnetic mount attaches to a piano’s cast iron frame or other metal part, allowing you to easily position an ATM350a microphone with accompanying gooseneck exactly where you want it.

Available to backorder


Built to handle extremely powerful, dynamic sound sources. Magnetic piano mount allows true flexibility on grand and upright pianos


  • Low-profile mic design for minimum visibility
  • Crisp, clear, well-balanced microphone response, even at high SPLs
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • UniMount® magnetic piano mount attaches securely to the frame or other metal part of the piano, and provides excellent shock resistance for the microphone
  • Rugged UniMount® 9" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play
  • In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise
  • Interchangeable elements available for hypercardioid and omnidirectional polar patterns
  • Included violin mount with hook-and-loop fastener provides an additional mounting option


  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 40 – 20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 12 dB/octave
  • Open Circuit Sensitivity: –49 dB (3.5 mV) re 1V at 1 Pa
  • Maximum Input Sound Level: 159 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 130 dB, 1 kHz at Max SPL
  • Signal-to-Noise Ratio: 65 dB, 1 kHz at 1 Pa
  • Phantom Power Requirements: 11– 52V DC, 3.5 mA typical
  • Switches: Flat, roll-off
  • Weight Microphone: 14.5 g (0.5 oz); Power Module: 90 g (3.2 oz)
  • Cable: 4.0 m (13.1'') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with HIROSE HR10-type connector
  • Dimensions: Microphone: 37.8 mm (1.49'''') long, 12.2 mm (0.48'''') maximum body diameter
  • Power Module: 92 mm (3.62") long, 18.9 mm (0.74") diameter
  • Output Connector: Power Module: Integral 3-pin XLRM-type
  • Accessories Included: ATM350a cardioid condenser microphone; AT8543 power module; AT8491P UniMount® magnetic piano mount; AT8490L UniMount® 9" gooseneck; AT8468 violin mount (hook-and-loop fastener); protective carrying case

WATCH: ATM350PL Overview | Piano Mount Microphone System

Additional information

Weight 1 kg
Dimensions 15 × 9 × 31 cm