Audio-Technica ATW1311 System 10 Pro Dual Body-Pack Wireless Mic System
$1,099.00 $959.00 Add to cart

Audio-Technica ATW1311 System 10 Pro Dual Body-Pack Wireless Mic System

SKU: ATW-3211

$959.00

Audio-Technica ATW1311 System 10 Pro features digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance.

Available to backorder

Description


Features

  • Operates in the 2.4 GHz range – completely free from TV interference
  • Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for
    added versatility
  • Up to five chassis (ten receiver units) can be linked and used simultaneously
  • Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations
  • Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status
  • Automatic frequency selection for seamless, interference-free operation
  • Extremely easy operation with instantaneous channel selection, sync, and setup
  • Three levels of diversity assurance: frequency, time & space
  • Ground-lift switch helps eliminate audible hum caused by ground loops

Specifications

Overall System

  • Operating Frequencies: 2.4 GHz ISM band (2400 to 2483.5 MHz)
  • Frequency Response: 20 Hz to 20 kHz (Depending on microphone type
  • Operating Range: 60 m (200') Open range env. with no interfering signals
  • Total Harmonic Distortion: <0.05% typical
  • Operating Temperature Range: 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures

Handheld Transmitter

  • RF Power Output: 10 mW
  • Spurious Emissions: Following federal and national regulations
  • Battery Type: Two 1.5V AA (not included)
  • Battery Life: >7 hours (alkaline) (Depending on battery type and use pattern)
  • Dimensions: 254.8 mm (10.03") long, 50.0 mm (1.97") diameter
  • Net Weight: 280 grams (9.9 oz) (without batteries)
  • Accessories Included: AT8456a Quiet-Flex™ stand clamp

Body Pack

  • RF Power Output: 10 mW
  • Battery Life: >7 hours (alkaline) Depending on battery type and use pattern
  • Battery Type: Two 1.5V AA (not included)
  • Dimensions: 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
  • Input Connections: Four-pin Locking Connector
    • Pin 1: GND
    • Pin 2: INST INPUT
    • Pin 3: MIC INPUT
    • Pin 4: DC BIAS +9V
  • Net Weight: 100 grams (3.5 oz) (without batteries)
  • Spurious Emissions: Following federal and national regulations

Receiver

  • Receiving System: Diversity (frequency/time/space)
  • Maximum Output Level: XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
  • Power Supply: 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
  • Operating Temperature Range: 40° F (4° C) to 110° F (43° C)
  • Dimensions: 209.8 mm (8.26") W x 44 mm (1.73") H x 169.3 mm (6.67") D
  • Weight: 940 grams (33.2 oz)
  • Accessories Included: AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet
  • Output Connector: Remote Receiver Connector: RJ45
  • Link Connector: RJ12

Additional information

Weight 1 kg
Dimensions 17 × 5 × 21 cm
Brand